Research on Non-Reactive Brazed Connections of Steel/Ceramics

Yuqiang Liu; Yan Zhang; Jianping Zhou; Daqian Sun; Hongmei Li

doi:doi:10.11648/j.ajasr.20230903.16

| Peer-Reviewed

Research on Non-Reactive Brazed Connections of Steel/Ceramics

Yuqiang Liu, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li

Published in American Journal of Applied Scientific Research (Volume 9, Issue 3)

Received: 17 July 2023 Accepted: 7 August 2023 Published: 22 August 2023

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The joining of dissimilar materials of ceramics and metals has been a hot research topic for both theoretical and practical applications at home and abroad. Connecting ceramics and metals together can combine the wear resistance, corrosion resistance and high temperature resistance of ceramics with the strong toughness of metals, becoming an ideal structural material and expanding the application fields of ceramics. The results of decades of research on ceramic and metal welding methods by countless scholars have shown that some of the joining problems have been solved, but the strength and heat resistance of ceramic/metal joints are still far from the requirements of using ceramic/metal joints. This paper reviews the current literature and practical applications, and after analysis, it is concluded that the effective methods for realizing ceramic-metal joints are mainly brazing, which has a very wide range of potential value in practical applications. However, these methods also have obvious drawbacks, leading to limitations in their own applications. For example, brazing generally requires a high surface quality of the workpiece, and this method of welding is only suitable for small workpieces and most lap joints, thus limiting its use in industrial production and making it unsuitable for high-temperature applications. On the other hand, inactive brazing permits effective ceramic/metal joining at high temperatures, which compensates to some extent for the disadvantages of brazing.

Published in	American Journal of Applied Scientific Research (Volume 9, Issue 3)
DOI	10.11648/j.ajasr.20230903.16
Page(s)	130-133
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2023. Published by Science Publishing Group

Keywords

Ceramic/Metal, Connections, Brazing, Inactive Brazing

References

[1]	Zhang Y, Feng D, He Z, et al. Progress in joining ceramics to metals [J]. Journal of Iron and Steel Research International, 2006, 13 (2): 1-5.
[2]	Liu G, Zhang X, Yang J, et al. Recent advances in joining of SiC-based materials (monolithic SiC and SiCf/SiC composites): Joining processes, joint strength, and interfacial behavior [J]. Journal of Advanced Ceramics, 2019, 8: 19-38.
[3]	Hiraga H, Fukatsu K, Ogawa K, et al. Nd: YAG laser welding of pure titanium to stainless steel [J]. Welding international, 2002, 16 (8): 623-631.
[4]	Shuilin Rao. Research status of silicon nitride ceramic bearing technology for aero-engine [J]. China Ceramic Industry, 2020, 27 (03): 35-38.
[5]	Asthana R, Singh M, Sobczak N. The Role of Wetting and Reactivity in Infiltration of Ceramic-Metal Composites [J]. Advances in Ceramic Coatings and Ceramic-Metal Systems: Ceramic Engineering and Science Proceedings, 2005, 26: 248-261.
[6]	K. Nogi. The role of wettability in metal-ceramic joining [J]. Scripta Materialia, 2010, 62 (12): 945-948.
[7]	Y. V. Naidich, V. S. Zhuravlev, I. I. Gab, et al. Liquid metal wettability and advanced ceramic brazing [J]. Journal of the European Ceramic Society, 2008, 28 (4): 717-728.
[8]	R. M. do Nascimento, A. E. Martinelli, A. J. A. Buschinelli. Recent advances in metal-ceramic brazing [J]. Ceramica, 2003, 49: 178-198.
[9]	Floriana-Dana Börner, Max Schreier, Bing Feng, et al. Development of laser-based joining technology for the fabrication of ceramic thermoelectric modules [J]. Journal of Materials Research, 2014, 29 (16): 1771-1780.
[10]	B. Kuhn, E. Wessel, J. Malzbender, et al. Effect of isothermal aging on the mechanical performance of brazed ceramic/metal joints for planar SOFC-stacks [J]. International Journal of Hydrogen Energy, 2010, 35 (17): 9158-9165.
[11]	Huaping Xiong, Bo Chen, Haisheng Zhao, et al. V-containing-active high-temperature brazes for ceramic joining [J]. Welding in the World, 2016, 60: 99-108.
[12]	K. S. Weil, J. S. Hardy, J. P. Rice, et al. Brazing as a means of sealing ceramic membranes for use in advanced coal gasification processes [J]. Fuel Guildford, 2006, 85: 156-162.
[13]	F. Smeacetto, M. Salvo, M. Ferraris, et al. Characterization and performance of glass-ceramic sealant to join metallic interconnects to YSZ and anode-supported-electrolyte in planar SOFCs [J]. Journal of the European Ceramic Society, 2008, 28 (13): 2521-2527.
[14]	Z. Weltsch, A. Lovas. Alloying Effects on Wetting Ability of Diluted Ag-Based Melts on Ceramic Substrates [J]. Materials Science Forum, 2010, 659: 109-113.
[15]	Huaping Xiong, Bo Chen, Yu Pan, et al. Joining of Si3N4 ceramic using PdCo(NiSiB)-V system brazing filler alloy and interfacial reactions [J]. Progress in Natural Science Materials International, 2014, 24: 61-67.
[16]	Alberto Passerone, Maria Luigia Muolo, Rada Novakovic, et al. Liquid metal/ceramic interactions in the (Cu, Ag, Au)/ZrB2 systems [J]. Journal of the European Ceramic Society, 2007, 27 (10): 3277-3285.
[17]	A. Guedes, A. M. P. Pinto, M. Vieira, et al. Multilayered interface in Ti/Macor® machinable glass-ceramic joints [J]. Materials Science and Engineering: A, 2001, 301 (2): 118-124.
[18]	Weibing Guo, Zongyu She, Haitao Xue, et al. Effect of active Ti element on the bonding characteristic of the Ag(111)/α-Al2O3(0001) interface by using first principle calculation [J]. Ceramics International, 2020, 46 (4): 5430-5435.
[19]	Gorji A H, Simchi A, Kokabi A H. Development of composite silver/nickel nanopastes for low temperature joining of yttria-stabilized zirconia to stainless steels [J]. Ceramics International, 2015, 41 (1): 1815-1822.
[20]	Feng J, Zhang L. Interface structure and mechanical properties of the brazed joint of TiC cermet and steel [J]. Journal of the European Ceramic Society, 2006, 26 (7): 1287-1292.
[21]	Ye D, Xiong W, Zhang X, et al. Microstructure and shear strength of the brazed joint of Ti(C,N)-based cermet to steel [J]. Rare Metals, 2010, 29 (001): 72-77.
[22]	Wang F Z, Wang Q Z, Yu B H, et al. Interface structure and mechanical properties of Ti(C,N)-based cermet and 17-4PH stainless steel joint brazed with nickel-base filler metal BNi-2 [J]. Journal of Materials Processing Tech, 2011, 211 (11): 1804-1809.
[23]	Wu Mingfang, Chen Jian, Pu Juan, et al. Microstructure and mechanical properties of Ti (C,N) and 45 steel brazed joints [J]. Welding Journal, 2007 (12): 9-12+113.
[24]	Singh M, Shpargel T P, Asthana R. Braze oxidation behavior and joint microstructure in YSZ/steel joints made using palladium brazes for SOFC applications [J]. Materials Science & Engineering A, 2008, 485 (1-2): 695-702.
[25]	Lin K-L, Singh M, Asthana R. Interfacial characterization of YSZ-to-steel joints with Ag–Cu–Pd interlayers for solid oxide fuel cell applications [J]. Ceramics International, 2012, 38 (3): 1991-1998.

Cite This Article

Plain Text BibTeX RIS

APA Style

Yuqiang Liu, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li. (2023). Research on Non-Reactive Brazed Connections of Steel/Ceramics. American Journal of Applied Scientific Research, 9(3), 130-133. https://doi.org/10.11648/j.ajasr.20230903.16

Copy | Download

ACS Style

Yuqiang Liu; Yan Zhang; Jianping Zhou; Daqian Sun; Hongmei Li. Research on Non-Reactive Brazed Connections of Steel/Ceramics. Am. J. Appl. Sci. Res. 2023, 9(3), 130-133. doi: 10.11648/j.ajasr.20230903.16

Copy | Download

AMA Style

Yuqiang Liu, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li. Research on Non-Reactive Brazed Connections of Steel/Ceramics. Am J Appl Sci Res. 2023;9(3):130-133. doi: 10.11648/j.ajasr.20230903.16

Copy | Download

@article{10.11648/j.ajasr.20230903.16,
  author = {Yuqiang Liu and Yan Zhang and Jianping Zhou and Daqian Sun and Hongmei Li},
  title = {Research on Non-Reactive Brazed Connections of Steel/Ceramics},
  journal = {American Journal of Applied Scientific Research},
  volume = {9},
  number = {3},
  pages = {130-133},
  doi = {10.11648/j.ajasr.20230903.16},
  url = {https://doi.org/10.11648/j.ajasr.20230903.16},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajasr.20230903.16},
  abstract = {The joining of dissimilar materials of ceramics and metals has been a hot research topic for both theoretical and practical applications at home and abroad. Connecting ceramics and metals together can combine the wear resistance, corrosion resistance and high temperature resistance of ceramics with the strong toughness of metals, becoming an ideal structural material and expanding the application fields of ceramics. The results of decades of research on ceramic and metal welding methods by countless scholars have shown that some of the joining problems have been solved, but the strength and heat resistance of ceramic/metal joints are still far from the requirements of using ceramic/metal joints. This paper reviews the current literature and practical applications, and after analysis, it is concluded that the effective methods for realizing ceramic-metal joints are mainly brazing, which has a very wide range of potential value in practical applications. However, these methods also have obvious drawbacks, leading to limitations in their own applications. For example, brazing generally requires a high surface quality of the workpiece, and this method of welding is only suitable for small workpieces and most lap joints, thus limiting its use in industrial production and making it unsuitable for high-temperature applications. On the other hand, inactive brazing permits effective ceramic/metal joining at high temperatures, which compensates to some extent for the disadvantages of brazing.},
 year = {2023}
}

Copy | Download

TY  - JOUR
T1  - Research on Non-Reactive Brazed Connections of Steel/Ceramics
AU  - Yuqiang Liu
AU  - Yan Zhang
AU  - Jianping Zhou
AU  - Daqian Sun
AU  - Hongmei Li
Y1  - 2023/08/22
PY  - 2023
N1  - https://doi.org/10.11648/j.ajasr.20230903.16
DO  - 10.11648/j.ajasr.20230903.16
T2  - American Journal of Applied Scientific Research
JF  - American Journal of Applied Scientific Research
JO  - American Journal of Applied Scientific Research
SP  - 130
EP  - 133
PB  - Science Publishing Group
SN  - 2471-9730
UR  - https://doi.org/10.11648/j.ajasr.20230903.16
AB  - The joining of dissimilar materials of ceramics and metals has been a hot research topic for both theoretical and practical applications at home and abroad. Connecting ceramics and metals together can combine the wear resistance, corrosion resistance and high temperature resistance of ceramics with the strong toughness of metals, becoming an ideal structural material and expanding the application fields of ceramics. The results of decades of research on ceramic and metal welding methods by countless scholars have shown that some of the joining problems have been solved, but the strength and heat resistance of ceramic/metal joints are still far from the requirements of using ceramic/metal joints. This paper reviews the current literature and practical applications, and after analysis, it is concluded that the effective methods for realizing ceramic-metal joints are mainly brazing, which has a very wide range of potential value in practical applications. However, these methods also have obvious drawbacks, leading to limitations in their own applications. For example, brazing generally requires a high surface quality of the workpiece, and this method of welding is only suitable for small workpieces and most lap joints, thus limiting its use in industrial production and making it unsuitable for high-temperature applications. On the other hand, inactive brazing permits effective ceramic/metal joining at high temperatures, which compensates to some extent for the disadvantages of brazing.
VL  - 9
IS  - 3
ER  -

Copy | Download

Author Information

Yuqiang Liu

School of Mechanical Engineering, Xinjiang University, Wulumuqi, China
Yan Zhang

School of Mechanical Engineering, Xinjiang University, Wulumuqi, China
Jianping Zhou

School of Mechanical Engineering, Xinjiang University, Wulumuqi, China
Daqian Sun

Key Laboratory of Automobile Materials, School of Materials Science and Engineering, Jilin University, Changchun, China
Hongmei Li

Key Laboratory of Automobile Materials, School of Materials Science and Engineering, Jilin University, Changchun, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Yuqiang Liu, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li. (2023). Research on Non-Reactive Brazed Connections of Steel/Ceramics. American Journal of Applied Scientific Research, 9(3), 130-133. https://doi.org/10.11648/j.ajasr.20230903.16

Copy | Download

ACS Style

Yuqiang Liu; Yan Zhang; Jianping Zhou; Daqian Sun; Hongmei Li. Research on Non-Reactive Brazed Connections of Steel/Ceramics. Am. J. Appl. Sci. Res. 2023, 9(3), 130-133. doi: 10.11648/j.ajasr.20230903.16

Copy | Download

AMA Style

Yuqiang Liu, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li. Research on Non-Reactive Brazed Connections of Steel/Ceramics. Am J Appl Sci Res. 2023;9(3):130-133. doi: 10.11648/j.ajasr.20230903.16

Copy | Download

@article{10.11648/j.ajasr.20230903.16,
  author = {Yuqiang Liu and Yan Zhang and Jianping Zhou and Daqian Sun and Hongmei Li},
  title = {Research on Non-Reactive Brazed Connections of Steel/Ceramics},
  journal = {American Journal of Applied Scientific Research},
  volume = {9},
  number = {3},
  pages = {130-133},
  doi = {10.11648/j.ajasr.20230903.16},
  url = {https://doi.org/10.11648/j.ajasr.20230903.16},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajasr.20230903.16},
  abstract = {The joining of dissimilar materials of ceramics and metals has been a hot research topic for both theoretical and practical applications at home and abroad. Connecting ceramics and metals together can combine the wear resistance, corrosion resistance and high temperature resistance of ceramics with the strong toughness of metals, becoming an ideal structural material and expanding the application fields of ceramics. The results of decades of research on ceramic and metal welding methods by countless scholars have shown that some of the joining problems have been solved, but the strength and heat resistance of ceramic/metal joints are still far from the requirements of using ceramic/metal joints. This paper reviews the current literature and practical applications, and after analysis, it is concluded that the effective methods for realizing ceramic-metal joints are mainly brazing, which has a very wide range of potential value in practical applications. However, these methods also have obvious drawbacks, leading to limitations in their own applications. For example, brazing generally requires a high surface quality of the workpiece, and this method of welding is only suitable for small workpieces and most lap joints, thus limiting its use in industrial production and making it unsuitable for high-temperature applications. On the other hand, inactive brazing permits effective ceramic/metal joining at high temperatures, which compensates to some extent for the disadvantages of brazing.},
 year = {2023}
}

Copy | Download

TY  - JOUR
T1  - Research on Non-Reactive Brazed Connections of Steel/Ceramics
AU  - Yuqiang Liu
AU  - Yan Zhang
AU  - Jianping Zhou
AU  - Daqian Sun
AU  - Hongmei Li
Y1  - 2023/08/22
PY  - 2023
N1  - https://doi.org/10.11648/j.ajasr.20230903.16
DO  - 10.11648/j.ajasr.20230903.16
T2  - American Journal of Applied Scientific Research
JF  - American Journal of Applied Scientific Research
JO  - American Journal of Applied Scientific Research
SP  - 130
EP  - 133
PB  - Science Publishing Group
SN  - 2471-9730
UR  - https://doi.org/10.11648/j.ajasr.20230903.16
AB  - The joining of dissimilar materials of ceramics and metals has been a hot research topic for both theoretical and practical applications at home and abroad. Connecting ceramics and metals together can combine the wear resistance, corrosion resistance and high temperature resistance of ceramics with the strong toughness of metals, becoming an ideal structural material and expanding the application fields of ceramics. The results of decades of research on ceramic and metal welding methods by countless scholars have shown that some of the joining problems have been solved, but the strength and heat resistance of ceramic/metal joints are still far from the requirements of using ceramic/metal joints. This paper reviews the current literature and practical applications, and after analysis, it is concluded that the effective methods for realizing ceramic-metal joints are mainly brazing, which has a very wide range of potential value in practical applications. However, these methods also have obvious drawbacks, leading to limitations in their own applications. For example, brazing generally requires a high surface quality of the workpiece, and this method of welding is only suitable for small workpieces and most lap joints, thus limiting its use in industrial production and making it unsuitable for high-temperature applications. On the other hand, inactive brazing permits effective ceramic/metal joining at high temperatures, which compensates to some extent for the disadvantages of brazing.
VL  - 9
IS  - 3
ER  -

Copy | Download